Balance Maintenance 101: How to Keep Your Unit Clean, Accurate & Reliable

Precision balances are built to deliver exact results — but only if they’re well maintained. Proper care doesn’t take long, but it makes a big difference in accuracy, performance, and lifespan.

Here’s a quick guide to help you get the most from your A&D balance.

✅ Daily Cleaning Tips

Keep your balance clean to avoid drift, contamination, and buildup.

• Power off and unplug the unit before cleaning.
  

• Remove the pan, draft shield, and any loose components.
  

• Use a lint-free cloth dampened with mild soap and water or 70% isopropyl alcohol.
  

• Avoid spraying liquids directly onto the unit.
  

• Dry all parts completely before reassembly.
  

Tip: In powder-heavy or high-traffic environments, consider cleaning twice daily and using a dust cover when not in use.

🔧 Best Practices for Long-Term Use

• Calibrate regularly — follow your internal or external calibration process.
  

• Avoid overloading the pan — even momentary strain can damage the load cell.
  

• Ensure the balance is level and located away from drafts or temperature fluctuations.
  

• If the balance is relocated, adjust the local gravity setting to maintain accuracy. (Ask your dealer if you need help!)
  
  

🚫 Things to Avoid

• Don’t use abrasive cleaners, strong solvents, or compressed air.
  

• Don’t place items on the pan when the unit is powered off.
  

• Don’t ignore drift or inconsistent readings — they’re usually a sign of contamination or environment issues.
  
  

👋 Need Help?

If you’re unsure about cleaning, calibration, or local setup, we’re here to help. Contact your authorized dealer or reach out to us directly.

📞 800-535-3751
📧 sales@ceproducts.ca
🌐 www.cambridgeenviro.com

Distributed by Cambridge Environmental Products Inc. Authorized A&D Weighing Master Distributor – Canada